Formation mechanisms of tribo-coating for low friction in UHV

Koshi Adachi, Hisakazu Sato, Koji Kato

研究成果: Conference contribution

抄録

Solid lubrication film formed by tribo-coating, which deposits a solid lubricant by evaporation to the contact interface during friction in vacuum, gives low friction coefficient below 0.03 that can not be observed by any other solid lubricants of soft metals. The tribo-coating film formed on the pin has nano-order composite structure which the crystalline indium of nano size are distributed in an amorphous matrix of silicon oxide and chromium oxide. Because of the nano composite structure, a very thin indium film is formed without break down like conventional precoated thin film. The thinner indium film can give smaller value of friction coefficient than that of conventional solid lubricant.

本文言語English
ホスト出版物のタイトルProceedings of the World Tribology Congress III - 2005
出版社American Society of Mechanical Engineers
ページ947-948
ページ数2
ISBN(印刷版)0791842029, 9780791842027
DOI
出版ステータスPublished - 2005
イベント2005 World Tribology Congress III - Washington, D.C., United States
継続期間: 2005 9 122005 9 16

出版物シリーズ

名前Proceedings of the World Tribology Congress III - 2005

Other

Other2005 World Tribology Congress III
CountryUnited States
CityWashington, D.C.
Period05/9/1205/9/16

ASJC Scopus subject areas

  • Engineering(all)

フィンガープリント 「Formation mechanisms of tribo-coating for low friction in UHV」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル