Ferroelectric data recording using servo-controlled tracking technique

Kenkou Tanaka, Yasuo Cho

研究成果: Article査読

2 被引用数 (Scopus)

抄録

A new method of achieving real information recording with a density above 1 Tbit/in.2 using servo tracking control in ferroelectric data storage systems is proposed. In this system, position control of the read/write head was realized by the scanning nonlinear dielectric microscopy technique. The data bits can be read by only one-line scanning on a one-line data track using high-precision head position control. The tracking accuracy of this system was evaluated to be about 2 nmpp. As a result, actual data composed of 64 × 64 bits were recorded at an areal density of 1 Tbit/in.2 and the bit error rate was evaluated to be 1.7 × 10-3.

本文言語English
論文番号09MA16
ジャーナルJapanese journal of applied physics
49
9 PART 2
DOI
出版ステータスPublished - 2010 9 1

ASJC Scopus subject areas

  • 工学(全般)
  • 物理学および天文学(全般)

フィンガープリント

「Ferroelectric data recording using servo-controlled tracking technique」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル