Fabrication technique for over 10-μm-thick ferrite particulate film at room temperature

Shuichiro Hashi, Nobuo Takada, Kazuhiro Nishimura, Osamu Sakurada, Shunji Yanase, Yasuo Okazaki, Mitsuteru Inoue

研究成果: Article査読

9 被引用数 (Scopus)

抄録

In order to fabricate the thick ferrite films, electrophoretic deposition (EPD) of Ni-Zn ferrite fine particles in water dispersion mixtures was carried out at room temperature. It is shown that densely packed ferrite films with a thickness of 12 μm can be deposited via EPD at high deposition rate of 400 nm/min from fine particles with a size of 10-30 nm onto an ITO glass substrate. The particulate film exhibited soft magnetic properties almost the same as raw particles.

本文言語English
ページ(範囲)3487-3489
ページ数3
ジャーナルIEEE Transactions on Magnetics
41
10
DOI
出版ステータスPublished - 2005 10
外部発表はい

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料
  • 電子工学および電気工学

フィンガープリント

「Fabrication technique for over 10-μm-thick ferrite particulate film at room temperature」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル