Fabrication of tunable micro scale pillars on the CuMn alloy by using ultra-short pulse laser

Changsheng Dong, Minlin Zhong, Jingjia liang, Wei Guo, Lin Li, Ting Huang, Mingxing Ma

研究成果: Conference article査読

抄録

The ablation of CuMn alloy using nanosecond laser (7ns pulse duration at the wave length of 532nm) and femtosecond laser (90fs pulse duration at 400nm) is reported. It is found that the roughness increases with the increase of the laser power and the reduction of frequency, scanning speed, the spacing and the melting point of the alloy. The various morphologies caused by the nanosecond and femtosecond laser are attributed to different removal mechanisms. By adopting optimized parameters, the micro scale pillars and pits were fabricated from the polished Cu-Mn alloy, with the sectional diameter of about 50 m, the spacing of about 60 m and the height of about 120 m.

本文言語English
ジャーナルOptics InfoBase Conference Papers
出版ステータスPublished - 2011
外部発表はい
イベントCIOMP-OSA Summer Session: Lasers and Their Applications, SumSession 2011 - Changchun, China
継続期間: 2011 7 312011 8 5

ASJC Scopus subject areas

  • 器械工学
  • 原子分子物理学および光学

フィンガープリント

「Fabrication of tunable micro scale pillars on the CuMn alloy by using ultra-short pulse laser」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル