Fabrication of TlBr strip detectors

Keitaro Hitomi, Yohei Kikuchi, Mohammad Nakhostin, Tadayoshi Shoji, Keizo Ishii

研究成果: Conference contribution


TlBr strip detectors with four anode strip electrodes were fabricated in this study. The strip electrodes were formed on TlBr wafers 1 mm thick with a vacuum evaporation process through a shadow mask. Each strip had a width of 0.8 mm and a length of 3.5 mm approximately. The gap between the strips was approximately 0.1 mm. Inter strip resistance more than 1 GΩ was obtained with the process. Energy resolutions of 7.0% and 3.8% FWHM were recorded for 511 keV and 1.33 MeV gamma-rays, respectively, with the TlBr strip detector at room temperature.

ホスト出版物のタイトルHard X-Ray, Gamma-Ray, and Neutron Detector Physics XI
出版ステータスPublished - 2009 12月 11
イベントHard X-Ray, Gamma-Ray, and Neutron Detector Physics XI - San Diego, CA, United States
継続期間: 2009 8月 32009 8月 6


OtherHard X-Ray, Gamma-Ray, and Neutron Detector Physics XI
国/地域United States
CitySan Diego, CA

ASJC Scopus subject areas

  • 応用数学
  • コンピュータ サイエンスの応用
  • 電子工学および電気工学
  • 電子材料、光学材料、および磁性材料
  • 凝縮系物理学


「Fabrication of TlBr strip detectors」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。