Fabrication of calcium phosphate films for coating on titanium substrates heated up to 773 K by RF magnetron sputtering and their evaluations

Kyosuke Ueda, Takayuki Narushima, Takashi Goto, Masayuki Taira, Tomoyuki Katsube

研究成果: Article査読

34 被引用数 (Scopus)

抄録

Calcium phosphate films were fabricated on titanium substrates heated up to 773 K using radiofrequency (RF) magnetron sputtering. The deposition rate, phase and preferred orientation of the calcium phosphate films were studied. Immersion tests for the films were conducted using Hanks' solution and PBS(-), and the surface reactions on the specimens coated with the calcium phosphate films were investigated. The bonding strength between the coating films and the titanium substrates before and after the immersion tests was evaluated; the bonding strength decreased after the immersion tests. The alkaline phosphatase (ALP) activity of SaOS-2 cells on a titanium plate coated with a calcium phosphate film was examined by conducting a culture test. Calcium phosphate coating increased the ALP activity of SaOS-2 cells cultured for 3 and 7 days. Titanium cylinders were coated with an amorphous calcium phosphate film and implanted into the mandibles of beagle dogs. An increase in the extent of bone-implant contact for the coated titanium cylinders was confirmed 8 to 12 weeks after implantation and compared with the case for uncoated titanium cylinders.

本文言語English
論文番号S14
ページ(範囲)S160-S166
ジャーナルBiomedical Materials
2
3
DOI
出版ステータスPublished - 2007 9月 1

ASJC Scopus subject areas

  • バイオエンジニアリング
  • 生体材料
  • 生体医工学

フィンガープリント

「Fabrication of calcium phosphate films for coating on titanium substrates heated up to 773 K by RF magnetron sputtering and their evaluations」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル