Fabrication of anisotropic SmFeN films using the aerosol deposition method

Satoshi Sugimoto, Toru Hirayama, Tomohito Maki, Toshio Kagotani, Koichiro Inomata, Jun Akedo

研究成果: Article査読

3 被引用数 (Scopus)

抄録

Effect of an applied field during film deposition on magnetic properties of aerosol-deposited (AD) Sm-Fe-N films was investigated. By aligning the two magnets with facing the opposite poles, a magnetic field of 0. l S T can be applied perpendicular to the film. The thickness of AD film decreased with increasing applied field. However, relatively large thickness of 94μm was obtained at 0.15 T. The remanence measured in the perpendicular direction increased from 54.5 to 61.3 Am2/kg by applying magnetic field. In the case of using a solenoid coil, a magnetic field of 0.21 T can be applied perpendicular to the film. The thickness of AD film also decreased, however, the AD film shows thickness of 65 μm at 0.21 T. The remanece in the perpendicular direction increased from 54.5 to 58.6 Am2/kg with increasing applied field. Therefore, it is concluded that the AD film can be oriented perpendicular to the film plane by applying a magnetic field and show high remanence with maintaining large thickness.

本文言語English
ページ(範囲)258-262
ページ数5
ジャーナルFuntai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy
53
3
DOI
出版ステータスPublished - 2006 3

ASJC Scopus subject areas

  • 機械工学
  • 産業および生産工学
  • 金属および合金
  • 材料化学

フィンガープリント

「Fabrication of anisotropic SmFeN films using the aerosol deposition method」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル