Fabrication of Al-coated CNF reinforced aluminum matrix composite by pressureless infiltration

Chitoshi Masuda, Mitsunori Kawaguchi, Masaki Yosioka, Fumio Ogawa, Hidetosi Fujii

研究成果: Article査読


Al-coated carbon nanofiber(CNF) reinforced aluminum matrix composites were fabricated by pressureless infiltration at 850°C in the presence of N2 into a CNF-Mg-Al preform. Aluminum coating on the CNF was obtained by Chemical Vapor Deposition(CVD) in order to improve the wettability and aluminum coating layer was about 10 nm on the CNF surface at 500°C and for holding time of 48 h. The effects of the preform fabrication conditions, such as pressure, temperature, and Mg contents on the infiltration were discussed. As the pressure was a 200 kPa at room temperature, the infiltration depth was largest. Moreover, Mg content was about 30% to obtain the largest infiltration depth. The ratio of non-coated to coated CNF was 0.5 to show the largest infiltration depth and the hardness and modulus of that composite including Al coated CNF were about Hv240 and 85 GPa, respectively.

ジャーナルNippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals
出版ステータスPublished - 2016

ASJC Scopus subject areas

  • 凝縮系物理学
  • 材料力学
  • 金属および合金
  • 材料化学


「Fabrication of Al-coated CNF reinforced aluminum matrix composite by pressureless infiltration」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。