Fabrication and characterization of laterally-driven piezoelectric bimorph MEMS actuator with sol-gel-based high-aspect-ratio PZT structure

Shinya Yoshida, Nan Wang, Masafumi Kumano, Yusuke Kawai, Shuji Tanaka, Masayoshi Esashi

研究成果: Article査読

9 被引用数 (Scopus)

抄録

This paper reports on the fabrication and characterization of a novel laterally-driven piezoelectric bimorph micro electro mechanical systems actuator with high aspect-ratio (AR) lead-zirconate-titanate (PZT) structures. The PZT structures (AR=8) sandwiched with Pt sidewall electrodes were fabricated by a nanocomposite sol-gel process with micromachined silicon templates. A single-cantilever-type lateral bimorph actuator was successfully fabricated, and no initial vertical bending was observed, even on a 500 μm long actuator. A lateral displacement of 10 μm was obtained in bimorph actuation at driving voltages of +25 V/-5 V. Then the piezoelectric property of the PZT structure was characterized from the actuator's performance. The lateral piezoelectric actuator has a variety of potential applications as a replacement for electrostatic comb drive actuators occupying a large area.

本文言語English
論文番号065014
ジャーナルJournal of Micromechanics and Microengineering
23
6
DOI
出版ステータスPublished - 2013 6 1

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Mechanics of Materials
  • Mechanical Engineering
  • Electrical and Electronic Engineering

フィンガープリント 「Fabrication and characterization of laterally-driven piezoelectric bimorph MEMS actuator with sol-gel-based high-aspect-ratio PZT structure」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル