Fabrication and characterization of Fe-based amorphous coatings prepared by high-velocity arc spraying

Wenmin Guo, Jianfeng Zhang, Yuping Wu, Sheng Hong, Yujiao Qin

    研究成果: Article査読

    24 被引用数 (Scopus)

    抄録

    Fe-based coatings with a high amorphous content were firstly developed by the traditional twin wires arc spray technology. In consideration of empirical rules, including the multi-component system, an optimal concentration of small atoms, negative heat of mixing and an appropriate atom size mismatch among the main components, the cored wires were designed to contain eight elements, which have an optimized atomic volume strain criterion λn, in range of 0.14-0.21, to render the coatings a high glass forming ability. Then the coatings were prepared using the above-designed cored wires through a rapid arc spray melting and solidification process. Crystalline phases could not be identified from the XRD patterns within the XRD resolution limits, suggesting that the as-sprayed coatings were approximately comprised of fully amorphous phases. With a dense structure and a low porosity of only 2%, the amorphous Fe-based coatings exhibited an attractive combination of high hardness (900-1100HV0.3) and superior bonding strength (44.9-54.8MPa). The coating at λn=0.21 had the lowest Gibbs free energy difference δG, exhibited the largest super-cooled liquid region δTx, Lu's criterion factor γ value and the heat of crystallization (δH) values, which indicating the highest GFA.

    本文言語English
    ページ(範囲)118-124
    ページ数7
    ジャーナルMaterials and Design
    78
    DOI
    出版ステータスPublished - 2015 8 5

    ASJC Scopus subject areas

    • Materials Science(all)
    • Mechanics of Materials
    • Mechanical Engineering

    フィンガープリント 「Fabrication and characterization of Fe-based amorphous coatings prepared by high-velocity arc spraying」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル