Evolution of boron segregation during tempering in B doped 9%Cr ferritic steel

Takumi Osanai, Nobuaki Sekido, Mitsuharu Yonemura, Kouichi Maruyama, Miyuki Takeuchi, Kyosuke Yoshimi

研究成果: Article査読

抄録

Boron segregation behavior during tempering at 600 and 790 °C was examined in a boron-doped 9Cr-steel by using high-resolution SIMS imaging (nano-SIMS). Boron segregation that developed at prior austenite grain boundaries (PAGBs) during austenitizing was found to decrease reduced during tempering because the equilibrium concentration of B segregation for austenite is larger than that for ferrite so that the segregated boron atoms diffused into block and packet boundaries. The size and the volume fraction of the carbide precipitates at PAGBs were smaller than those at packet boundaries, suggesting that boron segregation at PAGBs suppresses the carbide precipitation upon tempering.

本文言語English
論文番号111192
ジャーナルMaterials Characterization
177
DOI
出版ステータスPublished - 2021 7

ASJC Scopus subject areas

  • 材料科学(全般)
  • 凝縮系物理学
  • 材料力学
  • 機械工学

フィンガープリント

「Evolution of boron segregation during tempering in B doped 9%Cr ferritic steel」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル