Evaluation of mechanical properties of single-walled carbon nanotube solids prepared by spark plasma sintering

Go Yamamoto, Yoshinori Sato, Toru Takahashi, Mamoru Omori, Akira Okubo, Kazuyu Tohji, Toshiyuki Hashida

研究成果: Article査読

2 被引用数 (Scopus)

抄録

In our previous report, we have successfully prepared single-walled carbon nanotubes (SWCNTs) solids without any additives employing a spark plasma sintering (SPS) method. The effects of preparation conditions on the mechanical properties of the SWCNT solids have been investigated using a small punch (SP) testing method. It was shown from the SP test results that an indentation was formed on the specimen by the spherical puncher used for the load application, and the main fracture initiated and propagated in a cone-shaped region from the edge of the indentation. Therefore, no measurement of the fracture strength has been made on SWCNT solids prepared by the SPS method to date. In this investigation, the three-point bending tests were employed to examine the mechanical properties such as Young's modulus and fracture strength of the SWCNT solids. The compaction pressure used in the SPS method was 120 MPa, and the temperatures were 1000, 1200 and 1400°C, respectively. The mechanical properties have been found to depend on the processing temperature. The binder-free SWCNT solids had Young's modulus and fracture strength of 8.3 GPa and 52.4 MPa, respectively prepared by SPS technique.

寄稿の翻訳タイトルEvaluation of mechanical properties of single-walled carbon nanotube solids prepared by spark plasma sintering
本文言語Japanese
ページ(範囲)826-830
ページ数5
ジャーナルFuntai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy
52
11
DOI
出版ステータスPublished - 2005 11

Keywords

  • Mechanical property
  • Microstructure
  • Single-walled carbon nanotubes
  • Spark plasma sintering method
  • Three-point bending test

ASJC Scopus subject areas

  • 機械工学
  • 産業および生産工学
  • 金属および合金
  • 材料化学

フィンガープリント

「Evaluation of mechanical properties of single-walled carbon nanotube solids prepared by spark plasma sintering」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル