Estimation of articulated angle in six-wheeled dump trucks using multiple GNSS receivers for autonomous driving

Taro Suzuki, Kazunori Ohno, Shotaro Kojima, Naoto Miyamoto, Takahiro Suzuki, Tomohiro Komatsu, Yukinori Shibata, Kimitaka Asano, Keiji Nagatani

研究成果: Article査読

抄録

Due to the declining birthrate and aging population, the shortage of labor in the construction industry has become a serious problem, and increasing attention has been paid to automation of construction equipment. We focus on the automatic operation of articulated six-wheel dump trucks at construction sites. For the automatic operation of the dump trucks, it is important to estimate the position and the articulated angle of the dump trucks with high accuracy. In this study, we propose a method for estimating the state of a dump truck by using four global navigation satellite systems (GNSSs) installed on an articulated dump truck and a graph optimization method that utilizes the redundancy of multiple GNSSs. By adding real-time kinematic (RTK)-GNSS constraints and geometric constraints between the four antennas, the proposed method can robustly estimate the position and articulation angle even in environments where GNSS satellites are partially blocked. As a result of evaluating the accuracy of the proposed method through field tests, it was confirmed that the articulated angle could be estimated with an accuracy of 0.1 (Formula presented.) in an open-sky environment and 0.7 (Formula presented.) in a mountainous area simulating an elevation angle of 45 (Formula presented.) where GNSS satellites are blocked.

本文言語English
ページ(範囲)1376-1387
ページ数12
ジャーナルAdvanced Robotics
35
23
DOI
出版ステータスPublished - 2021

ASJC Scopus subject areas

  • 制御およびシステム工学
  • ソフトウェア
  • 人間とコンピュータの相互作用
  • ハードウェアとアーキテクチャ
  • コンピュータ サイエンスの応用

フィンガープリント

「Estimation of articulated angle in six-wheeled dump trucks using multiple GNSS receivers for autonomous driving」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル