Establishing the evaluation technique of the biaxial residual stress determined with the surface strain measurement under the spherical indentation

Norihiko Ozawa, Tomoaki Yoshizawa, Tetsuo Shoji, Yutaka Watanabe

研究成果: Article査読

1 被引用数 (Scopus)

抄録

In this research, a technique has been developed for quantitatively evaluating the amount and distribution of tensile and compressive biaxial residual stresses by using combined strain measurements under the spherical indentation loading together with the finite element method (FEM). When the spherical indentation is applied to the top surface of a steel plate, the elastic strain at an optimized position near the indentation is measured by strain gauges, where the biaxial residual stresses and applied indentation stresses are largely superimposed. In order to analyze the biaxial residual stress, FEM analysis has been conducted to establish the relationship between the elastic strain adjacent to the indentation and the indentation load for steel plates subjected to various uniform tensile and compressive biaxial bending stresses. A strain energy term (U*) has been newly introduced by integrating along the trajectory between the indentation load and elastic strain in a range from 0(zero) to the maximum load. The technique explained herein has been applied to quantify the biaxial residual stress from the maximum and minimum principal stresses at two directionally perpendicular points U*ax and U*by, which is expected contribute for enhancing reliability verification of steel parts.

本文言語English
ページ(範囲)546-554
ページ数9
ジャーナルNihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A
79
801
DOI
出版ステータスPublished - 2013

ASJC Scopus subject areas

  • 材料科学(全般)
  • 材料力学
  • 機械工学

フィンガープリント

「Establishing the evaluation technique of the biaxial residual stress determined with the surface strain measurement under the spherical indentation」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル