Energy discriminating x-ray camera utilizing a cadmium telluride detector

Eiichi Sato, Abderyim Purkhet, Hiroshi Matsukiyo, Akihiro Osawa, Toshiyuki Enomoto, Manabu Wantanabe, Jiro Nagao, Seiichiro Nomiya, Keitaro Hitomi, Etsuro Tanaka, Toshiaki Kawai, Shigehiro Sato, Akira Ogawa, Jun Onagawa

研究成果: Article査読

22 被引用数 (Scopus)

抄録

An energy-discriminating x-ray camera is useful for performing monochromatic radiography using polychromatic x rays. This x-ray camera was developed to carry out K-edge radiography using iodine-based contrast media. In this camera, objects are exposed by a cone beam from a cerium x-ray generator, and penetrating x-ray photons are detected by a cadmium telluride detector with an amplifier unit. The optimal x-ray photon energy and the energy width are selected out using a multichannel analyzer, and the photon number is counted by a counter card. Radiography was performed by the detector scanning using an x-y stage driven by a two-stage controller, and radiograms obtained by energy discriminating are shown on a personal computer monitor. In radiography, the tube voltage and current were 60kV and 36μA, respectively, and the x-ray intensity was 4.7μGy/s. Cerium K-series characteristic x rays are absorbed effectively by iodine-based contrast media, and iodine K-edge radiography was performed using x rays with energies just beyond iodine K-edge energy 33.2keV.

本文言語English
論文番号076502
ジャーナルOptical Engineering
48
7
DOI
出版ステータスPublished - 2009

ASJC Scopus subject areas

  • Atomic and Molecular Physics, and Optics
  • Engineering(all)

フィンガープリント 「Energy discriminating x-ray camera utilizing a cadmium telluride detector」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル