Emission characteristics of okamoto-cavity microwave-induced plasma in direct introduction of organic solvents and the application to the analysis of MIBK extract from iron-matrix samples

Tetsuo Maeda, Kazuaki Wagatsuma

研究成果: Review article査読

4 被引用数 (Scopus)

抄録

An Okamoto-cavity microwave-induced plasma (MIP) with a nitrogen-oxygen gas mixture was employed as an atomization and excitation source for emission analysis when organic solvent samples were directly aspirated The mixed gas plasmas could be maintained with a high robustness against the loading of organic solvents such as ethanol and 4-methyl-2-pentanone (MIBK). Also, the introduction of the organic solvents exerted little influence on the emission characteristics of the plasma; the atomic-to-atomic and the ionic-to-atomic intensity ratios of various emission lines were a little varied by introducing organic solutions containing different concentrations of ethanol. This is probably because the organic solvent can be easily removed due to reactions with active oxygen species in the MIR After test solutions containing Al, Co, Cr(III), Cu, Fe(III), Mo(VI), Ni, and Pb were extracted with MIBK, both the aqueous phase and the organic phase were aspirated into the plasma, giving calibration curves having good linearity, either from the aqueous phase for Al, Co, Cr, Ni, and Pb or from the organic phase for Fe and Mo. This effect can be explained from the partition coefficients of these elements between in MIBK and in water.

本文言語English
ページ(範囲)35-41
ページ数7
ジャーナルTetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
91
5
DOI
出版ステータスPublished - 2005 5

ASJC Scopus subject areas

  • 凝縮系物理学
  • 物理化学および理論化学
  • 金属および合金
  • 材料化学

フィンガープリント

「Emission characteristics of okamoto-cavity microwave-induced plasma in direct introduction of organic solvents and the application to the analysis of MIBK extract from iron-matrix samples」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル