Electrorefining of niobium in LiCl-KCl eutectic melt with Nb3Cl8

Kanggen Zhou, Toshihide Takenaka, Nobuaki Sato, Masanori Tokuda

研究成果: Article査読

抄録

The electrorefining of niobium has been investigated in LiCl-KCl eutectic melt with Nb3Cl8 at the temperature of 550°C by controlled potential electrolysis. The cathode deposits obtained at various cathode potentials were analyzed by XRD and EPMA. Tantalum content in deposits was measured by ICP. The cathode deposit was granular, powdery or dendritic niobium metal, and its morphology strongly depended on the cathode potential. Cathodic current efficiency was about 80% at the cathode potential of -0.8 to -1.2 Vvs. Ag/AgCl [(LiCl-KCl)eut+ AgCl (5mol%)]. and it deteriorated above and below this potential range. The tantalum removal ability was affected obviously neither by the cathode potential nor by the tantalum content in the anode. The tantalum content in the cathode deposit was reduced to about a half of that in the anode. However, the tantalum removal ability in the chloride melt was inferior to that in the fluoride melt.

本文言語English
ページ(範囲)134-137
ページ数4
ジャーナルElectrochemistry
65
2
出版ステータスPublished - 1997 12月 1

ASJC Scopus subject areas

  • 電気化学

フィンガープリント

「Electrorefining of niobium in LiCl-KCl eutectic melt with Nb3Cl8」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル