Electrical resistance behavior during tensile loading of Al 2O3 fiber-nano RuO2-glass composites

Byung Koog Jang, Hideaki Matsubara

研究成果: Article査読

抄録

The conductive composites in which nano RuO2 particles are dispersed throughout a glass matrix have been successfully fabricated by sintering at 850°C. The sensing properties of conductive composites were investigated in real time during tensile testing by measuring the electrical resistance. It is shown that the excellent sensing ability based on electrical resistance changes in the low strain range was due to deformation of conduction paths between nano RuO2 particles by brittle fracture of the glass matrix. The change of electrical resistance depends strongly on the volume percent of Al2O3 fiber reinforcement.

本文言語English
ページ(範囲)309-312
ページ数4
ジャーナルKey Engineering Materials
317-318
出版ステータスPublished - 2006 1 1

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

フィンガープリント 「Electrical resistance behavior during tensile loading of Al <sub>2</sub>O<sub>3</sub> fiber-nano RuO<sub>2</sub>-glass composites」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル