Effects of boron addition on microstructure and mechanical properties of an Ir85Hf15 two-phase refractory superalloy

Y. F. Gu, Y. Yamabe-Mitarai, T. Yokokawa, H. Harada

研究成果: Article査読

4 被引用数 (Scopus)

抄録

The aim of this study is to understand the effects of boron addition on the mechanical properties of the Ir85Hf15 two-phase refractory superalloy, especially on the fracture behaviour and the high-temperature strength. Our results indicated that adding boron was an effective way to raise the strength of Ir85Hf15 alloy at both room and high temperatures when the boron content was below a limited value, which was approximately 200 wppm for Ir85Hf15 alloy. Meanwhile, adding boron did not significantly improve the ductility, but it changed the fracture mode from the morphology of grain-boundary fractures generally observed in polycrystalline Ir and binary Ir85Hf15 alloys to mainly transgranular cleavage seen in the boron-doped Ir85Hf15. The effects of boron addition are discussed in terms of microstructure change and phase constitution.

本文言語English
ページ(範囲)1171-1178
ページ数8
ジャーナルMaterials Letters
57
5-6
DOI
出版ステータスPublished - 2003 1月
外部発表はい

ASJC Scopus subject areas

  • 材料科学(全般)
  • 凝縮系物理学
  • 材料力学
  • 機械工学

フィンガープリント

「Effects of boron addition on microstructure and mechanical properties of an Ir85Hf15 two-phase refractory superalloy」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル