Effects of alloying elements on the thermal stability and corrosion resistance of an fe-based metallic glass with low glass transition temperature

Yanhui Li, Xingjie Jia, Wei Zhang, Canfeng Fang, Xuewei Wang, Fengxiang Qin, Shinichi Yamaura, Yoshihiko Yokoyama

研究成果: Article査読

7 被引用数 (Scopus)

抄録

The effects of alloying elements on the thermal stability, glass-forming ability (GFA), corrosion resistance, and magnetic and mechanical properties of a soft magnetic Fe75P10C10B5 metallic glass with a low glass transition temperature (T g) of 723 K (450°C) were investigated. The addition of Mo, Ni, and Co significantly increased the stabilization of supercooled liquid, GFA, and corrosion resistance in the H2SO4 solution. The maximum critical diameter (d c) of 4 mm for glass formation was obtained for the Fe 55Co10Ni5Mo5P10C 10B5 alloy, which shows the largest supercooled liquid region (ΔT x ) of 89 K (89 °C). The substitution of Cr for Mo further enhanced the corrosion resistance of the Fe55Co 10Ni5Mo5P10C10B 5, while the ΔT x and d c decreased. The (Fe, Ni, Co)70(Mo, Cr)5P10C10B 5 bulk metallic glasses showed low T g of 711 K to 735 K (438 °C to 462 °C), wide ΔT x of 67 K to 89 K, high saturation magnetization of 0.79 to 0.93 T, low coercive force of 2.36 to 6.61 A m-1, high compressive yield strength of 3271 to 3370 MPa, and plastic strain of 0.8 to 2.3 pct. In addition, the mechanism for enhancing stability of supercooled liquid was discussed in terms of the precipitated phases during crystallization.

本文言語English
ページ(範囲)2393-2398
ページ数6
ジャーナルMetallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
45
5
DOI
出版ステータスPublished - 2014 5
外部発表はい

ASJC Scopus subject areas

  • 凝縮系物理学
  • 材料力学
  • 金属および合金

フィンガープリント

「Effects of alloying elements on the thermal stability and corrosion resistance of an fe-based metallic glass with low glass transition temperature」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル