Effect of Sn on microwave-induced heating and sintering of Ni-based metallic glassy alloy powders

Guoqiang Xie, Song Li, Dmitri V. Louzguine-Luzgin, Ziping Cao, Noboru Yoshikawa, Motoyasu Sato, Akihisa Inoue

研究成果: Article査読

13 被引用数 (Scopus)

抄録

Microwave (MW)-induced heating and sintering was carried out by a single-mode MW applicator in a separated electric field or magnetic field using the gas-atomized Ni52.5Nb10Zr15Ti15Pt7.5 metallic glassy alloy powder blended with various contents of Sn powders. The addition of Sn particles was found to promote the densification of the sintered Ni-based metallic glassy powders. With increasing Sn contents, the sintering temperature to obtain bulk sample with the retention of the glassy structure was reduced, and good bonding between powder particles was achieved.

本文言語English
ページ(範囲)274-277
ページ数4
ジャーナルIntermetallics
17
4
DOI
出版ステータスPublished - 2009 4

ASJC Scopus subject areas

  • 化学 (全般)
  • 材料力学
  • 機械工学
  • 金属および合金
  • 材料化学

フィンガープリント

「Effect of Sn on microwave-induced heating and sintering of Ni-based metallic glassy alloy powders」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル