Effect of grain cutting direction for ground surface roughness - Study on nonaxisymmetric aspherical grinding

Nobuhito Yoshihara, Jiwang Yan, Tsunemoto Kuriyagawa

研究成果: Article査読

6 被引用数 (Scopus)

抄録

Surfaces of optical parts are required to be smooth. Therefore, polishing is carried out. The period of polishing process depends on the roughness of ground surface. To shorten the period of polishing process, the roughness of ground surface must be smooth. In this paper, to clarify the optimum grinding condition, maximum height roughness of traverse ground surface is analyzed theoretically utilizing the statistical grinding theory. From the view point of relationship between the grain cutting direction and workpiece feed direction, the grinding condition is classified into parallel grinding and cross grinding. And it is found that the parallel grinding has an advantage in rough grinding, and the cross grinding is suited to finish grinding.

本文言語English
ページ(範囲)781-785
ページ数5
ジャーナルSeimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering
76
7
DOI
出版ステータスPublished - 2010 7

ASJC Scopus subject areas

  • 機械工学

フィンガープリント

「Effect of grain cutting direction for ground surface roughness - Study on nonaxisymmetric aspherical grinding」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル