Dissimilar Metal Joining of Aluminum to Steel by MIG Arc Brazing Using Flux Cored Wire

Taichi Murakami, Kazuhiro Nakata, Hongjun Tong, Masao Ushio

研究成果: Article査読

104 被引用数 (Scopus)

抄録

Dissimilar metal joining of aluminum to steel, which is difficult due to the formation of the brittle inter-metallic compound at the interface of the welded joint, by DC pulsed MIG arc brazing in a lap joint with the flux cored Al-Si filler wire has been investigated for the application of the weight saving of automobiles. The major compound formed at the interface between steel and weld metal was determined to be Al7.4Fe2Si as the Al-Fe-Si ternary compound. The composition control of weld metal can suppress the growth of the intermetallic compound layer less than the thickness of 2.5 μm. In this condition, the transverse tensile strength of the welded joint was about 80 MPa, 70 % of that of AI base metal due to the fracture at HAZ on the aluminum side. The mechanism of the suppressed growth of the intermetallic compound layer during MIG arc brazing has been discussed.

本文言語English
ページ(範囲)1596-1602
ページ数7
ジャーナルIsij International
43
10
DOI
出版ステータスPublished - 2003
外部発表はい

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

フィンガープリント 「Dissimilar Metal Joining of Aluminum to Steel by MIG Arc Brazing Using Flux Cored Wire」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル