Development of hydride absorber for fast reactor—evaluation of design method for hydride absorber rod—

Yoshihisa Tahra, Tomohiko Iwaski, Kenji Konaski

研究成果: Article査読

4 被引用数 (Scopus)

抄録

A hydride control rod is being developed to improve the economy of fast reactor plants because it has a longer lifetime than the currently used B4C control rod. A hydride burnable poison rod is also under development to reduce the number of control rods by decreasing core excess reactivity. Hydrogen in the hydride control rod causes neutron spectrum interference between the fuel and control rod regions. Thus, the study on core design was performed with the continuous-energy Monte Carlo code MVP using the nuclear data library JENDL-3.3 to deal with this phenomenon precisely. To evaluate the applicability of MVP to hydride absorber rod design, two benchmark calculations were carried out. One of them is a hydrogen-contained metal fuel fast core constructed in Fast Critical Assembly (FCA) and the other is the Nuclear Safety Research Reactor (NSRR) core where zirconium-hydride fuel (U-ZrH1.6) rods are loaded. These benchmark calculations and the design study on a fast reactor core with hafnium-hydride control rods have revealed that MVP is a reliable tool for hydride absorber rod design.

本文言語English
ページ(範囲)421-429
ページ数9
ジャーナルjournal of nuclear science and technology
47
4
DOI
出版ステータスPublished - 2010 4月

ASJC Scopus subject areas

  • 核物理学および高エネルギー物理学
  • 原子力エネルギーおよび原子力工学

フィンガープリント

「Development of hydride absorber for fast reactor—evaluation of design method for hydride absorber rod—」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル