Development of an MR seat suspension with self-powered generation capability

S. S. Sun, D. H. Ning, J. Yang, H. Du, S. W. Zhang, W. H. Li, M. Nakano

研究成果: Article査読

20 被引用数 (Scopus)

抄録

This paper proposes a self-powered magnetorheological (MR) seat suspension on the basis of a rotary MR damper and an electromagnetic induction device. By applying the self-powering component to the MR seat suspension, the operation cost of the semi-active seat is much cheaper because no external energy is required to control the MR damper. In this paper, the structure, design and analysis of the seat suspension were presented following the introduction section. The property tests of the self-powered seat suspension were conducted using an MTS machine. A robust control algorithm was developed to control the self-powered MR seat suspension and the vibration attenuation performance of the seat suspension was tested under two different vibration excitations, i.e. harmonic excitation and random excitation. The testing result verifies that the self-powered MR seat suspension under proper control can improve the ride comfort for passengers and drivers.

本文言語English
論文番号aa76b6
ジャーナルSmart Materials and Structures
26
8
DOI
出版ステータスPublished - 2017

ASJC Scopus subject areas

  • 信号処理
  • 土木構造工学
  • 原子分子物理学および光学
  • 材料科学(全般)
  • 凝縮系物理学
  • 材料力学
  • 電子工学および電気工学

フィンガープリント

「Development of an MR seat suspension with self-powered generation capability」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル