Development of advanced materials for spallation neutron sources and radiation damage simulation based on multi-scale models

Masayoshi Kawai, Hiroaki Kurishita, Hiroyuki Kokawa, Seiichi Watanabe, Norihito Sakaguchi, Kenji Kikuchi, Shigeru Saito, Toshimasa Yoshiie, Hiroshi Iwase, Takahiro Ito, Satoshi Hashimoto, Yoshihisa Kaneko, Masatoshi Futakawa, Shiori Ishino

研究成果: Article

6 引用 (Scopus)

抜粋

This report describes the status review of the JSPS Grant Team to develop advanced materials for the spallation neutron sources and modeling of radiation damage. One of the advanced materials is a toughness enhanced, fine-grained tungsten material (W-TiC) having four-times larger fracture toughness than ordinary tungsten and appreciable RT ductility in the recrystallized state. The other is an intergranular crack (IGC)-resistant austenitic stainless steel which was processed by the grain-boundary engineering (GBE). The experimental results are devoted to corrosion in a lead-bismuth eutectic, arrest of corrosion of weld-decay, radiation damage and creep rupture as well as new technique of GBE using a laser and annealing procedure. New technique seems to be applicable to large or complicated-shaped components. A series of the multi-scale models is built up from nuclear reaction between incident particles and medium nuclei to material property change due to radiation damage. Sample calculation is made on 3 mm-thick nickel bombarded by 3 GeV protons.

元の言語English
ページ(範囲)16-25
ページ数10
ジャーナルJournal of Nuclear Materials
431
発行部数1-3
DOI
出版物ステータスPublished - 2012 12 1

ASJC Scopus subject areas

  • Nuclear and High Energy Physics
  • Materials Science(all)
  • Nuclear Energy and Engineering

フィンガープリント Development of advanced materials for spallation neutron sources and radiation damage simulation based on multi-scale models' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用

    Kawai, M., Kurishita, H., Kokawa, H., Watanabe, S., Sakaguchi, N., Kikuchi, K., Saito, S., Yoshiie, T., Iwase, H., Ito, T., Hashimoto, S., Kaneko, Y., Futakawa, M., & Ishino, S. (2012). Development of advanced materials for spallation neutron sources and radiation damage simulation based on multi-scale models. Journal of Nuclear Materials, 431(1-3), 16-25. https://doi.org/10.1016/j.jnucmat.2011.11.023