風圧の空間的・時間的変動特性を考慮した機械的固定工法防水システムの耐風性能評価手法の開発

Shingo Sugiyama, Yasushi Uematsu, Kosuke Sato, Takuto Usukura, Katsuya Ono

研究成果: Article査読

抄録

A wind resistant performance test method for mechanically-attached waterproofing systems has been developed using three pressure loading actuators (PLAs). The chamber to which specimen is attached is divided into three rooms. The PLAs generates fluctuating wind pressures in the rooms separately using the time history of wind pressures measured at different points on the building model in a wind tunnel. The test results are consistent with those of full-scale measurements performed on a test building. Furthermore, the dynamic response of the roofing system is simulated by a finite element method. The result of the analysis is consistent with the experimental results.

寄稿の翻訳タイトルDevelopment of a wind resistance performance test method for mechanically-attached waterproofing systems considering the time-space correlation of wind pressures
本文言語Japanese
ページ(範囲)585-589
ページ数5
ジャーナルAIJ Journal of Technology and Design
25
60
DOI
出版ステータスPublished - 2019

Keywords

  • Cladding
  • Fluctuating wind pressure
  • Mechanically-attached waterproofing system
  • Pressure loading actuator
  • Time-space correlation
  • Wind resistance

ASJC Scopus subject areas

  • Architecture
  • Building and Construction

フィンガープリント 「風圧の空間的・時間的変動特性を考慮した機械的固定工法防水システムの耐風性能評価手法の開発」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル