抄録
An in-situ monitoring system for sintering shrinkage was devised to study the nonuniform deformation of injection moulded powder compacts. The monitoring system is based on the digital image correlation method and has a modified image processing software compared to the conventional method. The system consists of a bell-type sintering furnace and an optical image processing set-up, enabling one to measure two- and three-dimensional changes in the compacts during sintering on a non-contact and real time basis. Nonuniform and anisotropic sintering shrinkage was precisely determined for two types of complex-shaped powder compacts of stainless steel (SUS304) prepared by metal injection moulding at room temperatures up to 1543 K.
| 本文言語 | English |
|---|---|
| ページ（範囲） | 163-169 |
| ページ数 | 7 |
| ジャーナル | Metals and Materials International |
| 巻 | 5 |
| 号 | 2 |
| DOI | |
| 出版ステータス | Published - 1999 4月 |
| 外部発表 | はい |
ASJC Scopus subject areas
- 凝縮系物理学
- 材料力学
- 金属および合金
- 材料化学