DETERMINATION OF FRACTURE TOUGHNESS OF GRANITIC ROCK BY MEANS OF AE TECHNIQUE.

Hideaki Takahashi, Toshiyuki Hashida, Kinji Tamakawa, Shuji Yuda, Masahiko Suzuki

研究成果: Article査読

抄録

This paper describes the results of an experimental research in which the fracture toughness of a granitic rock is determined by means of AE technique. ASTM standard specimens of the notched bend type having width from 30 to 508 mm were tested. The deformation and fracture behavior showed a significant nonlinearity and a stable crack growth were observed in all the tests. AE signals were detected at low load level, which indicates the occurrence of microcracking near the initial notch tip. Furthermore an analysis of the waveform and frequency spectrum of AE signals leads to a conclusion that there exists a close relationship between micro-fracture process at the crank tip and AE signals.

本文言語English
ページ(範囲)17-21
ページ数5
ジャーナルNihon Kogyokaishi
100
1151
DOI
出版ステータスPublished - 1984 1月 1
外部発表はい

ASJC Scopus subject areas

  • 工学(全般)

フィンガープリント

「DETERMINATION OF FRACTURE TOUGHNESS OF GRANITIC ROCK BY MEANS OF AE TECHNIQUE.」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル