Current and future trends in topology optimization for additive manufacturing

Jikai Liu, Andrew T. Gaynor, Shikui Chen, Zhan Kang, Krishnan Suresh, Akihiro Takezawa, Lei Li, Junji Kato, Jinyuan Tang, Charlie C.L. Wang, Lin Cheng, Xuan Liang, Albert C. To

研究成果: Review article査読

232 被引用数 (Scopus)

抄録

Manufacturing-oriented topology optimization has been extensively studied the past two decades, in particular for the conventional manufacturing methods, for example, machining and injection molding or casting. Both design and manufacturing engineers have benefited from these efforts because of the close-to-optimal and friendly-to-manufacture design solutions. Recently, additive manufacturing (AM) has received significant attention from both academia and industry. AM is characterized by producing geometrically complex components layer-by-layer, and greatly reduces the geometric complexity restrictions imposed on topology optimization by conventional manufacturing. In other words, AM can make near-full use of the freeform structural evolution of topology optimization. Even so, new rules and restrictions emerge due to the diverse and intricate AM processes, which should be carefully addressed when developing the AM-specific topology optimization algorithms. Therefore, the motivation of this perspective paper is to summarize the state-of-art topology optimization methods for a variety of AM topics. At the same time, this paper also expresses the authors’ perspectives on the challenges and opportunities in these topics. The hope is to inspire both researchers and engineers to meet these challenges with innovative solutions.

本文言語English
ページ(範囲)2457-2483
ページ数27
ジャーナルStructural and Multidisciplinary Optimization
57
6
DOI
出版ステータスPublished - 2018 6 1
外部発表はい

ASJC Scopus subject areas

  • ソフトウェア
  • 制御およびシステム工学
  • コンピュータ サイエンスの応用
  • コンピュータ グラフィックスおよびコンピュータ支援設計
  • 制御と最適化

フィンガープリント

「Current and future trends in topology optimization for additive manufacturing」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル