Crystallography of upper bainite in Fe-Ni-C alloys

T. Furuhara, H. Kawata, S. Morito, T. Maki

研究成果: Article査読

120 被引用数 (Scopus)

抄録

The upper bainite structures were investigated in Fe-9Ni-(0.15-0.5)C (mass%) alloys transformed at temperatures between 723 and 623 K. A bainite packet similar to lath martensite is formed and is partitioned into blocks containing lath-shaped bainitic ferrite with the same parallel close-packed plane relationship of the K-S relationship. Its feature is categorized into three types: (A) a packet contains laths of two K-S variants with a small misorientation (sub-blocks), (B) a packet is divided by blocks largely misoriented and each block contains sub-blocks and (C) a packet is divided by blocks containing a single variant of laths. A packet of type (A) is formed at 723 K in each alloy whereas the packet type becomes (B) or (C) at lower temperatures. As a result, bainite blocks are refined with decreases in transformation temperature and carbon content. In contrast, blocks and packets of lath martensite are refined with increasing carbon content.

本文言語English
ページ(範囲)228-236
ページ数9
ジャーナルMaterials Science and Engineering A
431
1-2
DOI
出版ステータスPublished - 2006 9 15

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

フィンガープリント 「Crystallography of upper bainite in Fe-Ni-C alloys」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル