Crystalline texture and magnetostriction in rapid-solidified Fe-Pd alloy ribbons

Takamasa Onoki, Shin Ichi Yamaura, Yasubumi Furuya, Hisamichi Kimura, Takashi Matsuzaki, Tadao Watanabe

研究成果: Article査読

3 被引用数 (Scopus)

抄録

Rapid-solidified ferromagnetic shape memory Fe-30.2 at. %Pd alloy ribbon has a large magnetostriction more than 1.0 × 10-3 (= 1000 μstrain). This type of magnetostriction is caused by the re-arrangements of martensitic twins (i.e., variants) by the applied magnetic field, therefore, it is generally very sensitive to the crystalline texture and twin's morphology of material. In order to develop a more high performance magnetostrictive actuator material driven by smaller magnetic field, the effect of grain and twin boundary microstructures on megnetostriction was studied by changing the condition of heat treatments. For the sample with strongly (100) textured grains after oil-bath quenching, a steep increment and large strain of 0.7 × 10-3 was induced at a fairly low magnetic field of 35k A·m-1 (= 1.5kOe) when the magnetic field was applied normal to the ribbon surface. On the other hand, for the sample with randomly oriented grains and excessive existence of twin boundaries by ice-water quenching after long time annealing, the induced strain was initially small and then it gradually increased up to 0.6 × 10-3 at 70k A·m -1. This difference of sensitivity in magnetostriction behavior is discussed from the viewpoint of magnetic domain mobility in connection with grain and twin boundary microstructures.

本文言語English
ページ(範囲)3120-3123
ページ数4
ジャーナルMaterials Transactions
45
11
DOI
出版ステータスPublished - 2004 11月
外部発表はい

ASJC Scopus subject areas

  • 材料科学(全般)
  • 凝縮系物理学
  • 材料力学
  • 機械工学

フィンガープリント

「Crystalline texture and magnetostriction in rapid-solidified Fe-Pd alloy ribbons」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル