Creep-fatigue crack propagation behavior in a surface cracked plate

I. Nonaka, M. Kitagawa, H. Kaneko, T. Sato, M. Yamashita, K. Watashi, Y. Asada

研究成果: Article査読

1 被引用数 (Scopus)

抄録

A series of experiments were performed in order to clarify the surface crack growth behavior under creep-fatigue condition. Type 304 stainless steel was tested at 550°C and 650°C. Specimens were plates with a surface notch. Loading patterns were axial fatigue, bending fatigue, axial creep-fatigue and bending creep-fatigue. As results were obtained: (1) the beach mark method was available to measure the changes of the crack front shape after the test; (2) the electrical potential method was available to measure the changes of the crack front shape in real time; (3) the crack front shape was affected by the loading mode; and (4) ΔJ and ΔJc calculated from the proposed simplified method could characterize the surface crack growth rate.

本文言語English
ページ(範囲)293-298
ページ数6
ジャーナルNuclear Engineering and Design
139
3
DOI
出版ステータスPublished - 1993 3

ASJC Scopus subject areas

  • Nuclear and High Energy Physics
  • Nuclear Energy and Engineering
  • Materials Science(all)
  • Safety, Risk, Reliability and Quality
  • Waste Management and Disposal
  • Mechanical Engineering

フィンガープリント 「Creep-fatigue crack propagation behavior in a surface cracked plate」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル