Creep behavior of glass-fiber-reinforced nylon 6 products

Hironori Tohmyoh, Yusuke Ito, Kazuteru Eguchi, Wataru Daido, Jiro Utsunomiya, Yoshikatsu Nakano

研究成果: Article査読

5 被引用数 (Scopus)

抄録

The creep properties, that is, the velocity constant, activation energy, stress index, and time index, of a test piece (TP) cut from a glass-fiber-reinforced nylon 6 product were successfully determined by a compression creep test. In the determination of the creep properties, the experimental creep curves for the TP were fitted by finite element analysis (FEA). Fiber-reinforced nylon 6 beams with different fiber orientations were also prepared, and their creep properties were successfully determined by a combination of the bending creep test and the corresponding analysis. The creep behavior of the press-fit component composed of a metal collar and a fiber-reinforced nylon 6 product was predicted by FEA with the determined creep properties of the TP. The predicted retention forces were in good agreement with the experimental ones. The effects of the fiber orientation on the long-term reliability of the press-fit component are also discussed.

本文言語English
ページ(範囲)4213-4221
ページ数9
ジャーナルJournal of Applied Polymer Science
124
5
DOI
出版ステータスPublished - 2012 6 5

ASJC Scopus subject areas

  • Chemistry(all)
  • Surfaces, Coatings and Films
  • Polymers and Plastics
  • Materials Chemistry

フィンガープリント 「Creep behavior of glass-fiber-reinforced nylon 6 products」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル