Crack growth behavior for stress corrosion cracking of 690 alloy in high temperature water

Tichun Dan, Zhanpeng Lü, Jianqiu Wang, Enhou Han, Tetsuo Shoji, Wei Ke

研究成果: Article査読

4 被引用数 (Scopus)

抄録

Stress corrosion crack growth rates of alloy 690 thermally treated (TT) after one-directionally (1D) cold-rolling along the longitudinal (L) direction and three-directionally (3D) cold-rolling were successfully measured by ACPD technique in deoxygenated water with different dissolved hydrogen contents (CdH) at 340°C. The fracture mode is mainly intergranular mode in both two kinds of alloy 690TT. The crack growth rates in the T-L orientation are higher than those in the L-T orientation in 340°C deoxygenated environments. For 1D 25% alloy 690TT with T-L orientation, the measured average crack growth rate is 4.8 × 10-11 m/s in 340°C water with CdH 30 μL/g, and the measured average crack growth rate is 1.1 × 10-10 m/s in 340°C water with CdH 10 μL/g. The mechanism of crack growth is internal oxidation mechanism.

本文言語English
ページ(範囲)1267-1274
ページ数8
ジャーナルJinshu Xuebao/Acta Metallurgica Sinica
46
10
DOI
出版ステータスPublished - 2010 10 1

ASJC Scopus subject areas

  • 地盤工学および土木地質学
  • 材料力学
  • 機械工学
  • 金属および合金

フィンガープリント

「Crack growth behavior for stress corrosion cracking of 690 alloy in high temperature water」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル