Cooperative control experiment on a dual-arm handling robot

Masaru Uchiyama, Tetsuya Kitano, Kunio Miyawaki

    研究成果: Article査読

    抄録

    In our laboratory, we developed a dual-arm handling robot, called C-ARM (Cooperative-ARM), with the aim of practical application in shipbuilding work. The robot consists of two three-degrees-of-freedom planar arms with force/torque sensors at each joint. The manipulating forces and moments on the object are measured by the sensors. In this paper, we present results of an experiment on cooperative control using this dual-arm robot. The experiment consists of two parts: a fundamental experiment on hybrid position/force control using a symmetric scheme, and an experiment on load sharing. The load sharing is an application of the first experiment in which a quadratic programming algorithm for optimizing the internal forces and moments is used. Experimental results show that the hybrid position/force control scheme works well in cooperative control and that the load sharing optimizes the joint forces/torques of the robot.

    本文言語English
    ページ(範囲)202-208
    ページ数7
    ジャーナルNippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C
    62
    593
    DOI
    出版ステータスPublished - 1996

    ASJC Scopus subject areas

    • 材料力学
    • 機械工学
    • 産業および生産工学

    フィンガープリント

    「Cooperative control experiment on a dual-arm handling robot」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル