Contact damage of machinable aluminum nitride/ boron nitride nanocomposites

Takafumi Kusunose, Tohru Sekino, Yoichi Ando

研究成果: Article査読

4 被引用数 (Scopus)

抄録

AlN/BN nanocomposites indicated such a unique property as machinable with high fracture strength. In order to investigate the deformation mechanism of AlN/BN nanocomposites, Hertzian contact tests were performed on monolithic AlN, and nano-composite and microcomposite AlN/BN. The monolith and microcomposite comprised micro-sized grains of AlN and BN. In the microcomposite, plate-like BN particles preferentially oriented perpendicular to the hot-press direction. On the other hand, the nanocomposite showed a finer microstructure with fine BN particles and small matrix grains. These microstructural differences led to differences in the mechanism of contact damage. The damage of the monolithic AlN and the AlN/BN micro-composite exhibited collapsed Hertzian cone fracture and preferentially oriented large cracks perpendicular to the hot-press direction, whereas the damage observed in the nanocomposites appeared to be quasi-plastic deformation.

本文言語English
ページ(範囲)762-766
ページ数5
ジャーナルJournal of the Ceramic Society of Japan
116
1354
DOI
出版ステータスPublished - 2008 6

ASJC Scopus subject areas

  • Ceramics and Composites
  • Chemistry(all)
  • Condensed Matter Physics
  • Materials Chemistry

フィンガープリント 「Contact damage of machinable aluminum nitride/ boron nitride nanocomposites」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル