Conceptual design study of pellet fueling system for DEMO

Joint Special Team for Fusion DEMO

研究成果: Article

3 引用 (Scopus)

抜粋

Requirements for pellet injection system for a Japanese DEMO concept are comprehensively assessed in order to elucidate direction and target of R&D. A fusion output control simulation study using 1.5D transport code is carried out to estimate requirement of fuel particle source. Next, multivariable parameter dependence survey of the fuel deposition source on pellet speed, poloidal injection angle, pellet mass and pedestal height is performed. The conditions to achieve the target fueling depth derived from the output control study are shown. The AUG calibrated relation is referred to consider spatial restriction of tokamak geometry which relates maximum pellet velocity to curvature of pellet guide tube. Then the restriction is collated to the results of multivariable survey to find the most advantageous pellet speed, injection angle, and pellet mass which is consistent with both output control and tokamak geometry. Consequently, a conceptual design of fuel pellet injection system as the R&D target toward to DEMO is proposed.

元の言語English
ページ(範囲)620-623
ページ数4
ジャーナルFusion Engineering and Design
123
DOI
出版物ステータスPublished - 2017 11
外部発表Yes

ASJC Scopus subject areas

  • Civil and Structural Engineering
  • Nuclear Energy and Engineering
  • Materials Science(all)
  • Mechanical Engineering

フィンガープリント Conceptual design study of pellet fueling system for DEMO' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用