Cold spray coatings

研究成果: Review article査読

1 被引用数 (Scopus)

抄録

Cold spray (CS) technique is a process whereby metallic particles are utilized to form coatings using ballistic impact upon substrate materials. This technique is based on the high velocity (300-1500 m/s) impinging of small solid particle (generally 10-50 mm in diameter) on substrates. In this process, the particles are accelerated by the supersonic gas jet at the heated gas temperature, which is usually lower than melting temperature of powder materials. Consequently, this process solved the problem of thermal spraying, such as high temperature oxidation, phase transformation etc. Until now, the CS has a good track record in almost metallic coatings, such as copper, stainless steels, Ni base superalloys etc. Recently, some kinds of ceramics and polymers can be coated by the CS. The CS is expected as not only coating technique but also thick film formative technique. In this article, the present situation and future prospects of the CS are explained.

本文言語English
ページ(範囲)187-192
ページ数6
ジャーナルJournal of the Vacuum Society of Japan
60
5
DOI
出版ステータスPublished - 2017

ASJC Scopus subject areas

  • Materials Science(all)
  • Instrumentation
  • Surfaces and Interfaces
  • Spectroscopy

フィンガープリント 「Cold spray coatings」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル