Closure Process of Transverse Cracks after Shut-in in Hydraulic Fracturing Tectonic Stress Measurements

Takatoshi Ito, Kazuo Hayashi

研究成果: Article査読

抄録

Closure process of a transverse crack crossing a wellbore is analyzed to discuss physical meanings of the pressure decay curve after shut-in during hydraulic fracturing tectonic stress measurements, where the crack is assumed to be perpendicular to the wellbore axis and one of the principal axes of the tectonic stress is assumed to be parallel to the wellbore axis. The analysis is based on the linear theory of elasticity and linear fracture mechanics. It is shown that the whole crack closes instantaneously when the downhole water pressure is equal to the compressive tectonic stress acting perpendicularly to the crack plane. The instantaneous crack closure appears as a point of maximum curvature on the pressure decay curve after shut-in. Therefore, the compressive tectonic stress normal to the crack plane is determined as the pressure at the point of maximum curvature. Although the point of maximum curvature appears less clearly on pressure decay curve when the fluid loss coefficient is large, the instantaneous crack closure can always be detected clearly by utilizing the relation of the inverse of the decrease rate of the downhole water pressure vs the downhole pressure.

本文言語English
ページ(範囲)367-371
ページ数5
ジャーナルTransactions of the Japan Society of Mechanical Engineers Series A
58
547
DOI
出版ステータスPublished - 1992
外部発表はい

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

フィンガープリント 「Closure Process of Transverse Cracks after Shut-in in Hydraulic Fracturing Tectonic Stress Measurements」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル