Chemical and structural analysis on magnetic tunnel junctions using a decelerated scanning electron beam /639/301/1005/1007 /639/301/930/2735 /120 article

Edward Jackson, Mingling Sun, Takahide Kubota, Koki Takanashi, Atsufumi Hirohata

研究成果: Article査読

2 被引用数 (Scopus)

抄録

Current information technology relies on the advancement of nanofabrication techniques. For instance, the latest computer memories and hard disk drive read heads are designed with a 12 nm node and 20 nm wide architectures, respectively. With matured nanofabrication processes, a yield of such nanoelectronic devices is typically up to about 90%. To date the yield has been compensated with redundant hardware and software error corrections. In the latest memories, approximately 5% redundancy and parity bits for error corrections are used, which increase the total production cost of the devices. This means the yield directly affects the device costs. It is hence critical to increase the yield in nanofabrication. In this paper, we have applied our recently developed method to image buried interfaces in combination with chemical analysis to evaluate magnetic tunnel junctions and have revealed their different magnetoresistance ratios caused by the presence of materials formed at the junction edges. The formation of these materials can be avoided by optimising the junction patterning process to remove residual carbon introduced from resist. Our imaging method with chemical analysis have demonstrated a significant potential for the improvement of junction performance, resulting in higher yields. This can be used as a quality assurance tool in a nanoelectronic device production line.

本文言語English
論文番号7585
ジャーナルScientific reports
8
1
DOI
出版ステータスPublished - 2018 12 1

ASJC Scopus subject areas

  • General

フィンガープリント 「Chemical and structural analysis on magnetic tunnel junctions using a decelerated scanning electron beam /639/301/1005/1007 /639/301/930/2735 /120 article」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル