Characteristics of hydroxyapatite film formed on human enamel with the powder jet deposition technique

Ryo Akatsuka, Keiichi Sasaki, Mohammed Saeed Sepasy Zahmaty, Miyoko Noji, Takahisa Anada, Osamu Suzuki, Tsunemoto Kuriyagawa

研究成果: Article査読

12 被引用数 (Scopus)

抄録

This study aimed to create hydroxyapatite (HAp) film by powder jet deposition with manipulating the blasting nozzle above human enamel and to examine the microstructural and mechanical properties of the HAp film and the bonding strength at the interface between the HAp film and the enamel substrate. HAp particles calcinated at 1200°C with an average size of 4.7 μm were used. The HAp particles were mixed with carrier gas (N 2) to form an aerosol flow and was accelerated and blasted from the nozzle onto the enamel substrate at room temperature and atmospheric pressure. To evaluate the microstructure, scanning electron microscope (SEM) images of the surface and cross section of the HAp films and a three-dimensional profile of the HAp films were observed. To evaluate the mechanical properties, the micro-Vickers hardness and the bonding strength of the HAp films to the enamel substrate were measured. The deposition area of the HAp film was over 3 Ã - 4 mm. The average and maximum thickness were about 30 and 40 μm, respectively. No significant difference was observed between the hardness of the HAp film and the enamel (p > 0.05). The bonding strength of the HAp film was the same as the bonding strength between composite resin and enamel. Compared with previous reports, wider and thicker HAp film was created on the enamel substrate successfully. The HAp film, which has same hardness with enamel and same bonding strength to the enamel with composite resin, would be a candidate as dental restorative materials

本文言語English
ページ(範囲)210-216
ページ数7
ジャーナルJournal of Biomedical Materials Research - Part B Applied Biomaterials
98 B
2
DOI
出版ステータスPublished - 2011 8 1

ASJC Scopus subject areas

  • Biomaterials
  • Biomedical Engineering

フィンガープリント 「Characteristics of hydroxyapatite film formed on human enamel with the powder jet deposition technique」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル