Channel modeling for digital transmission using power line

Norio Sasaki, Kenichi Seino, Tasuku Hanaumi, Takeshi Oda, Fumiyuki Adachi

研究成果: Article

抜粋

SUMMARY Experiments on modeling a channel for digital transmission were performed, and an analysis of the results was used to clarify the characteristics of propagation loss and of the delay path profile, together with the noise characteristics of a power line carrier system using power transmission lines. To investigate the characteristics of propagation loss, the experimental results were subjected to multiple regression analysis and an equation for estimating propagation loss was derived with useful parameters. To investigate the characteristics of the delay path profile, the additional loss in the delay path was modeled and elucidated. The results showed that the delay path is traveled by both in-phase propagation and out-of-phase propagation. Thus, it is important to consider these two propagation characteristics during modeling. The noise characteristics were shown to be superpositions of the characteristics of thermal noise and impulse noise, and these two characteristics were modeled on the basis of a theoretical analysis and the cumulative probability distribution. The simultaneous use of these models agreed well with the measured results, indicating that the models are practical for real-world use.

元の言語English
ページ(範囲)17-30
ページ数14
ジャーナルElectronics and Communications in Japan
97
発行部数7
DOI
出版物ステータスPublished - 2014 7

ASJC Scopus subject areas

  • Signal Processing
  • Physics and Astronomy(all)
  • Computer Networks and Communications
  • Electrical and Electronic Engineering
  • Applied Mathematics

フィンガープリント Channel modeling for digital transmission using power line' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用