BGS wave and SH wave resonator filters using edge reflections

Michio Kadota

研究成果: Conference article査読

4 被引用数 (Scopus)

抄録

Small-sized and low loss surface acoustic wave (SAW) filters are required in current handy phones. In particular, such small filter for a first IF stage is urgently required, because its current size is much larger than that of a RF SAW filter. A size of a conventional SAW resonator filter is large, because it requires reflectors consisting of a lot of electrode fingers on both sides of interdigital transducers (IDTs). A shear horizontal (SH) component of Bleustein-Gulyaev-Shimizu (BGS) wave or SH type SAW has a characteristic of complete reflection at free edges of a substrate with a large dielectric constant. The author attempted to realize small low-loss resonator filters without electrode reflectors by utilizing the above-mentioned edge reflection of BGS or SH waves. Very small and low-loss transversely coupled and longitudinally coupled resonator filters could be realized using the BGS wave on piezoelectric ceramic substrates or the SH wave on single crystal substrates. For examples, insertion losses of 52 MHz IF filter for a spread spectrum (SS) cordless telephone system, 40 MHz one for an electronic toll collection system (ETC), and 49.2 MHz clock filter for digital audio broadcasting(DAB) using the BGS wave are 4.5, 4.4, and 2.7 dB, respectively. In spite of wire-bonded type of packages, sizes of the 52 MHz and 40 MHz filters are small; 4.5×5.2×1.75 and 3.8×3.8×1.5 mm, respectively. While, losses of 135 MHz filter for a global positioning system (GPS) and 190 MHz ones for a wide-band CDMA (Rx) using the SH wave on LiTaO3 are 3.3, and 3.8∼5.0 dB, respectively. The package sizes are also small: 3.8×3.8×1.5 and 3×3×1.15 mm, respectively. Furthermore, author attempted to develop global system for mobile communications (GSM) IF filters in 200 ∼400 MHz having a small size(3×3×1.15 mm), a low loss(3.5 dB), and a good temperature characteristics by using SH wave on quartz. In spite of wire-bonding type of IF filters, their filters'size(3×3×1.15 mm) is the same as that of RF SAW filters.

本文言語English
ページ(範囲)59-66
ページ数8
ジャーナルProceedings of the IEEE Ultrasonics Symposium
1
出版ステータスPublished - 2000 12 1
イベント2000 IEEE Ultasonics Symposium - San Juan, Puerto Rico
継続期間: 2000 10 222000 10 25

ASJC Scopus subject areas

  • 音響学および超音波学

フィンガープリント

「BGS wave and SH wave resonator filters using edge reflections」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル