Beam simulations of high brightness photocathode DC gun and injector for high repetition FEL light source

T. Miyajima, Y. Honda, M. Yamamoto, X. Jin, T. Uchiyama, N. Nishimori, R. Nagai, R. Hajima

研究成果: Conference contribution

抄録

As a next generation FEL light source based on linac, high repetition rate operation to increase average FEL power has been proposed, e.g. LCLS-II project. The injector, which generates high brightness and high average current beam, is one of key components. A photocathode DC gun and superconducting RF cavities, which are developed for ERL light source, can be employed for the high repetition rate injector. For high repetition rate operation of FEL light source, injector simulations were carried out based on ERL injector with demonstrated hardware performance by the cERL beam operation in KEK. The optimization results show that the gun voltage of 500 kV is helpful to achieve low emittance. In addition, to estimate optimum gun voltage and cavity acceleration gradient for the FEL operation, two optimizations with different injector layouts were carried out. The results show that the both different layouts have potential to achieve target emittance for FEL operation. Under the realistic operation condition, the transverse normalized rms emittance of 0.8 mm mrad with the rms bunch length of 3 ps, the bunch charge of 325 pC, and the beam energy of 10 MeV is obtained from the optimizations.

本文言語English
ホスト出版物のタイトルProceedings of the 36th International Free Electron Laser Conference, FEL 2014
出版社Joint Accelerator Conferences Website (JACoW)
ページ980-984
ページ数5
ISBN(電子版)9783954501335
出版ステータスPublished - 2014
イベント36th International Free Electron Laser Conference, FEL 2014 - Basel, Switzerland
継続期間: 2014 8 252014 8 29

出版物シリーズ

名前Proceedings of the 36th International Free Electron Laser Conference, FEL 2014

Other

Other36th International Free Electron Laser Conference, FEL 2014
CountrySwitzerland
CityBasel
Period14/8/2514/8/29

ASJC Scopus subject areas

  • Nuclear and High Energy Physics

フィンガープリント 「Beam simulations of high brightness photocathode DC gun and injector for high repetition FEL light source」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル