Beam extraction from a Hall-type ion accelerator

Akira Ando, Masashi Tashiro, Keiichiro Hitomi, Kunihiko Hattori, Masaaki Inutake

研究成果: Article

3 引用 (Scopus)

抜粋

Fundamental characteristics of beam extraction from a Hall-type accelerator working with permanent magnets were investigated. Ions were extracted by an axial electric field Ez in a small annular plasma channel with a radial magnetic field Br. Effects of discharge current and voltage, length of discharge channel, and gas flow rate were examined. It can deliver a large beam current density of more than 100 mA cm2 with low beam energy of 50 eV. By biasing an additional plasma chamber attached at the extraction area, the beam energy was controlled independently of the beam current.

元の言語English
記事番号02B705
ジャーナルReview of Scientific Instruments
79
発行部数2
DOI
出版物ステータスPublished - 2008

ASJC Scopus subject areas

  • Instrumentation

フィンガープリント Beam extraction from a Hall-type ion accelerator' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用

    Ando, A., Tashiro, M., Hitomi, K., Hattori, K., & Inutake, M. (2008). Beam extraction from a Hall-type ion accelerator. Review of Scientific Instruments, 79(2), [02B705]. https://doi.org/10.1063/1.2801645