Application of Pressurized Carbon Dioxide to Drying Process of Wood

T. Kono, H. Shinohara, H. Takahashi, T. Shoji, T. Hashida, N. Yamasaki

研究成果: Article査読


A new process using pressurized carbon dioxide was investigated in order to minimize the carrying cost of wood. This process was performed using the following steps: (1)Firstly, woods were placed in a pressure vessel, (2) Secondly, the vessel was pressurized with carbon dioxide, (3) Thirdly, the pressurized state was held for a certain period and the pressure was then released suddenly. Experimental results obtained from this study were as follows; The carbon dioxide drying process could easily reduce one half of the moisture content ratio of woods. The higher pressure of carbon dioxide gave the more effective drying of woods.

ジャーナルReview of High Pressure Science and Technology/Koatsuryoku No Kagaku To Gijutsu
出版ステータスPublished - 1998

ASJC Scopus subject areas

  • Chemistry(all)
  • Materials Science(all)
  • Condensed Matter Physics

フィンガープリント 「Application of Pressurized Carbon Dioxide to Drying Process of Wood」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。