Application of Mn-Zn Ferrite with Fine Grain Size to Magnetic Heads

Yutaka Yamamoto, Akihiro Makino

研究成果: Article査読

抄録

The Mn-Zn ferrite ceramics with high density above 99.8% and fine grain size below 5 μm have been obtained by sintering of hydrothermal-precipitated ferrite powders at lower temperature than that in the ordinary process. Mn-Zn ferrite ceramics with grain sizes below 3 μ m have relative permeabilities comparable to that of commercial one in a frequency range above 5MHz. The single side MIG heads composed of ferrite with fine grain(Gs=2.3 μ m) are manufactured. The output voltage of the heads composed of the developed ferrite are equal to those of the heads composed of the commercial ferrite. The asymmetry instabilities of the heads composed of the developed ferrite are almost equal to those composed of the single crystal Mn-Zn ferrite which seemed to be good for the asymmetry instabilities. Therefore, Mn-Zn ferrite with fine grain sizes and high density is expected to be useful as magnetic head material for high density recording.

本文言語English
ページ(範囲)881-885
ページ数5
ジャーナルjournal of the japan society of powder and powder metallurgy
40
9
DOI
出版ステータスPublished - 1993
外部発表はい

ASJC Scopus subject areas

  • 機械工学
  • 産業および生産工学
  • 金属および合金
  • 材料化学

フィンガープリント

「Application of Mn-Zn Ferrite with Fine Grain Size to Magnetic Heads」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル