Anodized aluminum pressure sensitive paint in a cryogenic wind tunnel

Hirotaka Sakaue, John P. Sullivan, Keisuke Asai, Yoshimi Iijima, Tetsuya Kunimasu

研究成果: Conference article査読

56 被引用数 (Scopus)

抄録

Anodized aluminum pressure-sensitive paint has been used to measure the surface pressure distributions of wind tunnel models in a cryogenic wind tunnel. A thin, uniform anodized aluminum layer was directly coated onto the wind tunnel models by an electrochemical process. The resulting coating has an extremely high oxygen sensitivity for very low mole fractions of oxygen in the working gas (∼150 ppm). Numerous types of anodized aluminum PSPs were calibrated to optimize the sensitivity and the uniformity and to prevent the aging of anodized aluminum PSP. The luminophore deposition affected the sensitivity, and the phosphoric acid modification improved the uniformity and reduced the aging. To demonstrate this technology, a flat model and a 14% thick circular are bump model were tested in the 0.1 m Transonic Cryogenic Wind Tunnel at NAL. Surface pressure distributions on the models were clearly captured.

本文言語English
ページ(範囲)337-346
ページ数10
ジャーナルInstrumentation in the Aerospace Industry : Proceedings of the International Symposium
出版ステータスPublished - 1999 12月 1
外部発表はい
イベントProceedings of the 45th International Instrumentation Symposium - Albuquerque, NM, United States
継続期間: 1999 5月 21999 5月 6

ASJC Scopus subject areas

  • 工学(全般)

フィンガープリント

「Anodized aluminum pressure sensitive paint in a cryogenic wind tunnel」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル