Anelastic behavior under tensile and shearing stresses in bulk metallic glasses

Kazutaka Fujita, Akihisa Inoue, Tao Zhang, Nobuyuki Nishiyama

研究成果: Article査読

13 被引用数 (Scopus)

抄録

It is known that an anelastic deformation occurs more remarkably for amorphous ribbon alloys than for crystalline metallic alloys by the tensile test. In addition, the result of the molecular dynamics simulation on tensile and shearing tests for Cu single component amorphous metal has indicated that the anelastic deformation occurs more remarkably under the sheafing stress rather than under the tensile stress. In this report, tensile and torsional tests were actually performed for bulk metallic glasses to examine the difference in the anelastic behavior under shearing and tensile stresses. Single-phase bulk metallic glasses, La60Al20Ni10Cu5Co5, Pd40Cu30Ni10P20 and Zr55Cu30Ni5Al10 (at%), were chosen together with a steel, JIS SGD 400-D, as a representative of metallic crystals. The test specimens were a round bar shape and the diameters of a parallel gage section were 4 to 10 mm. No anelastic behavior was observed for the steel under tensile and shearing stresses. Although the metallic glasses did not exhibit distinct anelastic deformation under the tensile stress, the shearing stress mode leads to a significant anelastic deformation even at low stress level. The amount of the anelastic deformation increases with an increase in the shearing stress level.

本文言語English
ページ(範囲)1957-1960
ページ数4
ジャーナルMaterials Transactions
43
8
DOI
出版ステータスPublished - 2002 8

ASJC Scopus subject areas

  • 材料科学(全般)
  • 凝縮系物理学
  • 材料力学
  • 機械工学

フィンガープリント

「Anelastic behavior under tensile and shearing stresses in bulk metallic glasses」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル